(1) Surface material: the rigidity of the label is the key to mark, so it requires a certain strength and hardness of the surface material, and the rigidity of the label is related to the thickness of the material and the area of the label, so when using soft film material, its thickness should be appropriately increased, generally controlled at 100 μ It is more than 5 m.
(2) Release force: the release force is too small, the label is easy to fall off in the process of conveying (out of the bottom paper); The release force is too large, it is difficult for the label to separate from the bottom paper, and it is unable to label. All technical indexes should be controlled comprehensively to keep the release force within a reasonable range.
(3) Backing paper: the surface of backing paper should be coated with silicon evenly, and the release force should be consistent; Uniform thickness, good tensile strength, to ensure that the label does not break; Uniform thickness and good light transmittance ensure that the sensor can correctly identify the position of the label.
(4) Processing quality: it is required that both sides of the base paper should be smooth and without break after slitting, so as to avoid the base paper breaking when the tension changes.





