Machine use, maintenance and installation
1. Because the filling machine is an automatic machine, the size of easy to pull bottle, bottle cushion and bottle cap are required to be unified.
2. Before driving, you must rotate the machine with the handle, check whether there is abnormal rotation, and judge whether it is normal before driving.
3. When adjusting the machine, the tools should be used properly. It is strictly forbidden to use too large tools or force too much to dismantle the parts, so as to avoid damaging the parts or affecting the performance of the machine.
4. Whenever the machine is adjusted, be sure to tighten the loose screw, and turn the machine with the handle to see if its action meets the requirements before driving.
5. The machine must be kept clean. It is strictly forbidden to have oil, liquid medicine or glass debris on the machine, so as not to cause damage to the machine
(1) in the production process of the machine, the liquid medicine or glass debris shall be removed in time.
(2) before shift handover, clean all parts of the machine surface once, and add clean lubricating oil to all activity departments.
(3) it should be scrubbed once a week, especially the places that are not easy to clean in normal use or blown with compressed air.
