This machine is suitable for PET cans, paper cans, tinplate cans, iron cans, bowl cans and other cans, the equipment is easy to clean, easy to operate and other characteristics.
Product Features:
1. The overall appearance material is mainly made of stainless steel 304, with a thickness of 1.5mm;
2. Using 4 hob cutters to seal, the sealing force is more uniform, and the sealing performance index can reach the international standard;
3. Adopt intelligent program design plus touch screen control, easy to use and set;
4. Adopt front and back design, life span of more than 5 million seals;
5. Set up no lid and no sealing can and fault detection and shutdown to effectively reduce equipment failure;
6. The lower lid can be capped with 200 pieces (one tube) at a time;
7. To replace the sealing caliber, the mold needs to be replaced, and the replacement and adjustment time is about 40 minutes;
8. Change the height of the can, no need to replace accessories, adopt hand-crank screw design, adjust the height time is about 5-10 minutes;
9. The defective rate is extremely low, iron cans are less than 1/10,000, plastic cans are less than 1/1,000, and paper cans are less than 2/1000;
10. The indenter adopts chromium-12 molybdenum vanadium quenching treatment, the hardness exceeds 50 degrees, and the service life exceeds 1 million cans;
11. The conveyor belt material is nylon POM material, and the chuck is made of PP plate material;
12. There are maintenance guidelines on the side of the fuselage, and the maintenance operation is simple and convenient.
Product Applicable:
Widely used in canned fruit, canned nuts, canned food, canned beverage, canned milk powder and other fields.
